gnoahhh, my own prejudice on the topic, but I would prefer a straight wall case and may accept a caliber larger than .22 before all is said and done. I blanch at the idea of a custom case hand crafted by gnomes. I'm guessing at the end of the day that I'd go larger caliber before necking a case down, but cannot deny either. .32 Wesson short might work, but brass is a conundrum, or .25 ACP. Could tweak that one with a little bit of choke in the case mouth and still have some capacity. Or no choke and just live with a 50-60 grain bullet. Recollection has it the .25 is a truish .25, something like .251" diameter, +/-...Yep, SAAMI sez so. Barrel in .251" groove is going to be a quest. .22-.25 AI Squill Smasher?
.32 Short Colt looks more groovy...if I'm going to neck it down.
Last edited by DigitalDan; 05/08/17.
