Originally Posted by DerekP
Originally Posted by Boxer
And these "features" looked "right"?

Horribbly fhuqking schitty Lot on left,equally schitty Lot on right. 1000% on the money,amidship(that means the middle).

Lot to left has flash holes way out of round and far from centered. Lot to right,is Norma soft,dismal in headspace uniformity and fhuqking worthless in concentricity too,though the flash holes are purtier.


[Linked Image]

Some thangs mighta been measured. Laffin'!

[Linked Image]

Hint. Someone is likely welllllllllll ahead of the curve and sandbagging more than a smidge and it prolly ain't Peterson. Laffin'!

Field curvature do not make "drilled" flash holes appear as being punched. Hint.(grin)

If it helps,I can shoot various P&S's,FF,APS-H and APS-C from 17 to 400mm,if only for conversation.

[Linked Image]

Peterson for whatever reason,seems to "think" that they can lie their way out of outright SCHIT products. Personally,I do not see that happening.(grin)

I VERY much enjoy the heartfelt Insecurities,surging Estrogen Levels and WIDE fhuqking berth of all things prudent,in the hopes of salving these sad sack fhuqking realities,crafted as per their best abilities. Fascinating as well,that folks not fluent in their native tongue and a couple/few tons of IQ shy of making the mark,are prone to Emotion,rather than discuss facts.


1)How the fhuqk hard is it,to cite if the 'holes are punched or not?

2)How the fhuqk hard is it,to cite a Rockwell head/web number?

3)How the fhuqk hard is it,to cite the acceptable percentage of Dog Schit shipped in a single order?

4)How the fhuqk do you miss "QC" that horribly and then try to condone it?

Just who in the fhuqk,would be STUPID enough to buy this schit,after this MAGNIFICENT display of outright dishonesty and schit "craftsmanship",as a Business Model?

Spare no details,you "trend setters".

Laffin'!

Peterson finds Facts unsettling and are hoping to fixate Fluff instead. The STUPID Fhuqk can't even manage to post a picture either. Now THAT...is Peterson "consistency"!

Laffin'!

BEST Thread ever!!!!



Just checked an Inbox and was "rewarded" with the HIGHLY Esteemed Peterson Me Sooooooooooo Horny Brass "test",for "QC" considerations!

Laffin'!

[Linked Image]
[Linked Image]



Holy fhuqking schit I'm laughing sooooooooooo fhuqking hard...I'm CRYING!!!!!

Wayyyyyyyyyyyy BEST thread ever!





I just noticed you have two different user names. Did you mean to do that? Seems like you are a troll bud. If they are so bad, why wont you let us make it right by replacing them?



Of course he is a troll. He's an insecure blowhard and an attention whore too. That is the very reason you should have never entered the thread. You have let him drag you into the mud with him. He has won. Jezzuz brother. This is the second blunder the blowhard has baited you into.

My advice here is free, so you get what you pay for. You'll have another unwinnable customer in the future. No matter their tone when they approach you, you don't get down on their level and you don't take offense. You do all that you can to fulfill your obligation to them. You take the steps necessary to fix anything that may be broken and you move on. End of story.

As far as forums go, I have seen a lot of manufacturers and industry reps enter into various forums. It almost never works out well. There will always be losers whose sole goal is to bring you down or try to look smarter than you.

Build a good product, price it right and stand behind it. You will succeed. Find a way to keep it in production during periods of high demand and you'll be a smash hit.

Last edited by PaulBarnard; 07/31/18.