Originally Posted by jwall
G L -

Yes, Brownell's is where I got mine --- in the '80s.

I would call and talk w/them, maybe they have some that are not on the site.

God luck

Jerry

I decided to go McPherson's suggested route. Cost ... one old screwdriver, two sacrificial hacksaw blades (pretty tough shank), some electric tape and some sweat.

Here it is in action.

[Linked Image]

And here is the action tube less the o-ring. At first, I couldn't even find the o-ring, but then it fell out from inside tube. Not the outer tube though. It was inside the tube with the groove for it ... odd. Pic isn't the best, but the o-ring is shriveled, broken and rotted out. So the rattle should be cured once I get it replaced. I'm thinking Sil-Glyde brake caliper grease might be a good lube for it or maybe some of the wax based dry lubes used for chains.

[Linked Image]