irfubar; Good afternoon Brother Fubar, I hope all is well down in Hollywood so far this weekend.
That stock from Roger is absolutely, 100% to my taste - sorry!!
But indeed, wow!
I've been using System 3 G2 as a base coat, but it's a bit thick and shall try the acetone trick.
If you're so inclined, what 2 part epoxy is your favorite and roughly what viscosity are you looking for when it's thinned.
Thanks in advance and good hunting.
Dwayne
Brother Dwayne, I like total boat 2 part epoxy and mix it pretty thin, a little above water viscosity, I warn the stock in a 200 degree oven first, then paint it on until it will no longer soak in. When it cures I wet sand with 320 grit cut with mineral spirits. It leave a nice base for the Tru Oil
Originally Posted by Judman PS, if you think Trump is “good” you’re way stupider than I thought! Haha
