I remember you saying that. My experience with Douglas has been good, I hope it continues. I pulled the barrel this morning and reinstalled with a lower torque value. Originally it took 85 ft/lbs to get the nut to align. I lapped the face of the receiver a little more to get the nut to align at 55 ft/lbs today so maybe that did something. I also bedded the extension to the upper with a little loctite. I know its put together right, I know my loads are consistent, and I have no doubts about my optic and mounts holding up. If I can't get it to shoot, I will look at replacing it somehow.


John 8:12 "I am the light of the world. Whoever follows me will never walk in darkness, but will have the light of life."