Home Forums Hunting & Shooting Express Rifles and Big Bores Only The great 458 Winchester. Everyone should own one at least once

The Warne and LeupoldMark4 are both solid steel, same high quality, 20-MOA Picatinny rails.
The Warne fits the top of receiver with no over-hang or under-hang of receiver top at either end.
The Leupold Mark4 comes with a set of both 8x40 and 6x48 screws, but under-hangs rear of receiver and over-hangs front of receiver,
which may actually be more desirable for getting more eye relief with some scopes, on a .458 WM.

Is there another make of 20-MOA Picatinny rail out there that will fit a Winchester M70 LA-3.6" without having to have another hole drilled in it ?
Sumbuddy who know ?

A couple more Winchester M70 LA-3.6" actions with 2-piece bases instead of 1-piece rails: 8X40 Screwed and Glued with J-B Weld:





Too bad the bolt faces on those two were opened up by about 0.010" for .404 Jeffery,
instead of for .458 WM+.
Switching of bolts and barrels would be required.
But I thank God they are not Blasers.