If a lion charged me I would probably crap my pants too.
Moving on to the next epiphany:
You do not need to shorten the bridge at rear of M70 Classic from Connecticut or FN to turn the .30-06-length donor action into a 3.6"-COL-accepting action. All you have to do is unblock the rear of magazine and shorten the ejector-bolt-stop. See discussion here:
This sort of rear bridge (M70 .270 WCF to .338 WinMag action) ...
... works as well as this sort of rear bridge (M70 .375 H&H to .458 WinMag) ...
... at ejecting 3.6" COL , unfired cartridges from a 3.6" mag box with proper fit of ejector-bolt-stop.
So why bother lengthening magazine and refitting ejector on the Super Grade .458 WinMag to turn it into a .458 WM+ for 3.6" COL? The .30-06 actions will do that by adding a bolt face job to the conversion, and they are easier to come by and available in stainless.
No need to re-bore my M70 Classic stainless .375 WbyMag. No need to muck with my M70 Super Grade .458 WinMag nor Alaskan .375 H&H. Not even any need to rebarrel the M70 Extreme Weather .338 WinMag.
Have spare .30-06 will convert to .458 WM+.
Another advantage to the longer rear bridge, besides just looking beefier and stronger: Less rain can get into the action.
The ones from FN/SC/Portugal have a longer extractor and only two screws in one-piece bottom, and a funky new trigger. Oh well, nothing is ever perfect.
Ron aka "Rip" for Riflecrank Internationale Permanente NRA Life Benefactor and Beneficiary .458 Winchester Magnum, Magnanimous in Victory THE WALKING DEAD does so remind me of Democrap voters. Donkeypox.