Bubba has been at it again. The balls are seated by using a .45-70 Govt. seater die with properly shaped seater plug, to center the ball bearing, and pushing the bullet and balls up into the seater die with the usual short pusher rod from a LEE bullet sizer kit. Die and seater plug are adjusted in the press for a precise BOL every time with one pull of the press to bottom out.
This encourages even greater desire for a Hammer Bullets custom .458-400gr hunting bullet with a BC near 0.400. Simple as this (another repeat for emphasis):
The custom 400-grainer could be up to 1.500" long, the sleeker the better, with a 3mm hollow point diameter. Even though the unadulterated .458-402gr Shock Hammer with quarter-inch HP diameter is quite useful out to 300 yards, I can't help thinking about how fast it will shed those 2600 fps from a .458 WM+.
Ron aka "Rip" for Riflecrank Internationale Permanente NRA Life Benefactor and Beneficiary .458 Winchester Magnum, Magnanimous in Victory THE WALKING DEAD does so remind me of Democrap voters. Donkeypox.