rodeojoe,

Is it going to be Sir Rodeo, Sir Cooke, or Sir What ?

Originally Posted by rodeojoe
I picked up a box of 325 grain Hornady FTX to play with. I have not picked a powder for them yet.
I can't take the recoil I used to but I won't need it for 100yd or closer shots.
My M77 Mark II also has a Shilen barrel on it. It was on it when I picked it up.

I have one good load for that bullet, it was another one-and-done 5-shot test
over an Oehler 35P with a 100-yard target.
That bullet is pretty soft, usually loaded to no more than 2100 fps in a .45-70,
but you could start here and work down if it is too destructive of venison:

325-gr FTX
COL = 3.300" seated long (seated on factory cannelure, COL will be about 2.990")
H4198 71.0 grains, F215 primer, WW-Super brass (or Hornady or RP brass OK)
24-7/8" CZ barrel, 59*F
5-yard Oehler velocity, uncorrected to MV = 2550 fps

Starting with 55 grains of H4198 and 2.990" COL would probably be like a hot .45-70 Govt. load from the restrained .458 WinMag.
You can play with low powder charge and +/- foam wad filler as well as COL to find an accurate load at desired velocity, I bet.


Ron aka "Rip" for Riflecrank Internationale Permanente
NRA Life Benefactor and Beneficiary
.458 Winchester Magnum, Magnanimous in Victory
THE WALKING DEAD does so remind me of Democrap voters. Donkeypox.