Gee, the pic above, it all makes sense save for the power driver. Mebbe I've lost track of technical progress, but...libation, reloading, porn...what's the driver for? I mean if it was a sawzall I'd get it....
Dinosaur Dan
Not to worry Dinosaur Dan, your's is not a pre-cambian meltdown, nor has a Venusian stole your noodle.
As Guitar Shorty deftly states, one needs the right tool for the job.
The brass I was using had been previously fired and fire-formed. I use the drill and steel wool for polishing case mouths prior to neck sizing. Then I use it with the primer pocket brush to clean the primer pockets. If virgin brass, I will use a VLD reamer to lightly chamfer the inside of the case mouth should I use a flat based bullet.
![[Linked Image]](http://s38.photobucket.com/user/glenn1221/media/latestgunstuff/IMG_0988_zps72a8b5ad.jpg.html)
