Home Forums Hunting & Shooting Deer Hunting Birth of a deer camp

Here's one of the most recent elevated 4'x4' enclosed stands I put together.



I pre built these modular style so they could be carried to the location easier and put together with screws. And not those whimpy ass Philips head sheet rock screws, use decent construction screws with a thick shank and a torx head is a plus.





I went with slider windows in these, the plexi runs side to side in the grooves of some old T&G boards that I have screwed into place with the tongue grooves retaining the plexi glass edges.

You will need some young helper slaves to help carry the modular sections out to the stand location.







These are the "wafer board/OSB/norboard" that you guys both mentioned. I painted the crap out of it with some left over gray automotive grade urethane. oil based exterior enamel from the hardware store would work well too.

Just try to do a better camo job than I did and you will be golden.